API Guide

2019-03-27T15:24:06Z 46741 default.xml
2019-04-01T11:22:33Z 456 custom.xml
2. Copy one of the available severity profiles to a remote host.
OS10# copy severity-profile://default.xml scp://username:password@a.b.c.d/dir-path/
mySevProf.xml
3. Modify the .xml file with changes as required.
NOTE: When you modify the xml file, you must select one of the following severities:
● CRITICAL
● MAJOR
● MINOR
● WARNING
● INFORMATIONAL
If you want OS10 to generate the event, set the Enable flag to true. To turn off event notification, set the Enable flag
to false.
If you enter invalid values, the event severity-profile command fails.
4. Copy the custom profile to the OS10 switch.
OS10# copy scp://username:password@a.b.c.d/dir-path/mySevProf.xml severity-profile://
mySevProf_1.xml
When you copy the custom profile, you must update the name of the custom profile. You cannot use the same name as the
default profile (default.xml) or the active profile (mySevProf.xml).
5. Apply the custom severity profile on the switch.
OS10# event severity-profile mySevProf_1.xml
NOTE: You must restart the switch for the changes to take effect.
6. Restart the switch.
OS10# reload
7. Use the show event severity-profile command to view the custom profile that is active.
OS10# show event severity-profile
Severity Profile Details
--------------------------------------------
Currently Active : default
Active after restart : mySevProf_1.xml
Delete custom severity profile
You can delete custom severity profiles that you no longer need. However, you cannot delete the default or active severity
profile.
To delete a custom severity profile, use the delete severity-profile://profile-name command. For example:
OS10# delete severity-profile://mySevProf_1.xml
System logging
You can change the system logging default settings using the severity level to control the type of system messages that log.
The range of logging severities are:
● log-emerg—System is unstable.
Troubleshoot Dell EMC SmartFabric OS10
1435