API Guide

event severity-profile
Configures a severity profile to change the severity of events, or turn off event notifications.
Syntax
event severity-profile {default | profile-name}
Parameters profile-name—Name of the custom severity profile, a maximum of 64 characters. The file
extension, .xml is optional.
Default Default.xml
Command Mode EXEC
Usage
Information
Configures a severity profile to change the characteristics of events. If you configure a custom profile,
the profile applies on top of the default profile. Restart the system for the changes to take effect. The
system restart ensures that the existing stateful events are tagged appropriately based on the newly
applied severity profile. Severity profiles are stored in the severity-profile:// partition. This partition
includes a factory default severity profile, default.xml. You cannot edit or delete the default and active
severity profiles.
Example
OS10# event severity-profile MySevPro_1
%Notice: Severity profile will be active after system restart
Supported
Releases
10.5.0 or later
show alarms
Displays all current active alarms in the system.
Syntax
show alarms
Parameters None
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show alarms
Sq No Severity Name
Timestamp Source
----- -------- ------------------------------
--------------------------- ------
7563 critical EQM_MORE_PSU_FAULT Fri Jul 26
19:26:16 2019 /pus/1
7566 warning EQM_TML_MINOR_CROSSED Fri Jul 26
19:30:22 2019 /pus/1
7569 information L2_SERV_LACP_CMS_CPS_SEND_FAIL Fri Jul 26
19:55:40 2019 /pus/1
Supported
Releases
10.2.0E or later
show alarms acknowledged
Displays all acknowledged alarms.
Syntax
show alarms acknowledged
Parameters None
Default None
Troubleshoot Dell EMC SmartFabric OS10 1441