API Guide

Acknowledged: true
-------------------------------------------
Supported
Releases
10.2.0E or later
show alarms sequence
Displays information corresponding to the active alarm based on the sequence number that you specify.
Syntax
show alarms sequence sequence-number
Parameters
● sequence-number — Enter the sequence number corresponding to the active alarm.
Default None
Command Mode EXEC
Usage
Information
Use the show alarms command to view all active alarms. Use an active alarm sequence number to view
detailed information about that alarm.
Example
NOS# show alarms sequence 3
Active-alarm details - 1
------------------------------------------
Sequence Number: 3
Severity: major
Type: 1081375
Source: /psu/2
Name: EQM_MORE_PSU_FAULT
Description: psu 2 is not working correctly
Raise-time: Sun 10-07-2018 18:39:47
Ack-time:
State: raised
-------------------------------------------
Supported
Releases
10.4.3E or later
show alarms severity
Displays all active alarms corresponding to a specific severity level.
Syntax
show alarms severity severity
Parameters severity — Set the alarm severity:
● critical — Critical alarm severity.
● major — Major alarm severity.
● minor — Minor alarm severity.
● warning — Warning alarm severity.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
(Warning)
OS10# show alarms severity warning
Active-alarm details - 1
-------------------------------------------
Sequence Number: 5
Severity: warning
Type: 1081364
Troubleshoot Dell EMC SmartFabric OS10 1443