API Guide

Example (details)
OS10# show event history details
Event History Details - 2
-------------------------------------------
Sequence Number: 2
Severity: informational
Name: IFM_ASTATE_UP
Description: Dummy Event
Timestamp: Fri May 03 18:13:07 2019
Source: -
State: stateless
-------------------------------------------
Event History Details - 1
-------------------------------------------
Sequence Number: 1
Severity: informational
Name: IFM_ASTATE_UP
Description: Dummy Event
Timestamp: Fri May 03 18:13:05 2019
Source: -
State: stateless
-------------------------------------------
Example
(summary)
If the sequence number counter is not rolled over, the Last Rollover Time value is empty.
OS10# show event history summary
Event History Summary
-------------------------------------------
Total-count: 583
Raised-count: 4
Ack-count: 0
Cleared-count: 0
Stateless-count: 579
Next Sequence Number: 584
Last Rollover Time:
-------------------------------------------
Supported
Releases
10.5.0 or later
show event severity-profile
Displays the active severity profile and the profile that becomes active after a system restart.
Syntax
show event severity-profile
Parameters None
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show event severity-profile
Severity Profile Details
------------------------
Currently Active : default
Active after restart : mySevProf.xml
Supported
Releases
10.5.0 or later
1446 Troubleshoot Dell EMC SmartFabric OS10