API Guide

Table 30. Openconfig LLDP
Sensor group
name
YANG container
oc-lldp openconfig-lldp/lldp
Table 31. Openconfig STP
Sensor group
name
YANG container
oc-stp openconfig-spanning-tree/stp
Table 32. Vendor UFD
Sensor group
name
YANG container
oc-vendor-ufd ufd/uplink-state-group-stats/ufd-groups
Table 33. Vendor VXLAN
Sensor group
name
YANG container
oc-vendor-
vxlan
vxlan/vxlan-state/remote-endpoint/stats
Table 34. Openconfig VLAN
Sensor group
name
YANG container
oc-vlan openconfig-interfaces/interfaces/interface
Table 35. Openconfig VRRP
Sensor group
name
YANG container
oc-vrrp openconfig-interfaces/interfaces/interface/subinterfaces/subinterface
Lifecycle Management using SmartFabric Director
The lifecycle management using SmartFabric Director is available with OS10 release 10.5.0.1 and later. The gNMI agent also
processes image upgrade or downgrade requests from the SmartFabric Director server. SmartFabric Director can send these
requests to the gNMI agent using Google Network Operating Interface (gNOI) API calls.
The following tables describe the gNOI APIs that are supported:
Table 36. download_and_install API
API Name Description
download_and_inst
all
Downloads the OS10 binary image from the specified image-url path location. The following image-
url paths are supported:
● Remote FTP server
● Remote HTTP or HTTPS server
● Remote TFTP file system
After you download the OS10 binary image, the gNMI agent installs the image at specified location
based on the image type. For example, if the image type is OS10 NOS, the agent installs the image
on the standby partition of the flash drive. If the image download or install operation fails, the
system sends an appropriate error message. As a reboot is not required, this remote image-install
process does not affect the current service.
SmartFabric Director 149