API Guide

Example
OS10(config)# snmp-server contact administrator
Supported
Releases
10.2.0E or later
snmp-server enable traps
Enables SNMP traps on a switch.
Syntax
snmp-server enable traps [notification-type] [notification-option]
Parameters
● notification-type notification-option — Enter an SNMP notification type, and
optionally, a notification option for the type.
Table 42. Notification types and options
Notification type Notification option
entity — Enable entity change
traps.
None
envmon — Enable SNMP
environmental monitor traps.
○ fan — Enable fan traps.
○ power-supply — Enable power-supply traps.
○ temperature — Enable temperature traps.
lldp — Enable LLDP state change
traps.
○ rem-tables-change — Enable the
lldpRemTablesChange trap.
snmp — Enable SNMP traps.
○ authentication — Enable authentication traps.
○ coldstart — Enable coldstart traps when you
power on the switch and the SNMP agent initializes.
○ linkdown — Enable link-down traps.
○ linkup — Enable link-up traps.
○ warmstart — Enable warmstart traps when the
switch reloads and the SNMP agent reinitializes.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
If you do not enter a notification-type or notification-option parameter with command, all
traps are enabled. If you enter only a notification-type, all notification-option traps
associated with the type are enabled.
To enable specific SNMP trap types, re-enter the command multiple times with different notification
types and options.
To configure a host to receive SNMP notifications, use the snmp-server host command.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.1.0. Also
supported in SmartFabric mode starting in release 10.5.0.1.
The no version of the command disables SNMP traps on the switch.
Example
OS10(config)# snmp-server enable traps envmon fan
OS10(config)# snmp-server enable traps envmon power-supply
OS10(config)# snmp-server enable traps snmp
OS10(config)# no snmp-server enable traps snmp
Supported
Releases
10.4.1.0 or later
168 System management