API Guide

of their clocks. Using this information, each peer selects the best time from several other clocks, updates the local clock, and
estimates its accuracy.
NOTE: OS10 supports both NTP server and client roles.
Enable NTP
NTP is disabled by default. To enable NTP, configure an NTP server where the system synchronizes. To configure multiple
servers, enter the command multiple times. Multiple servers may impact CPU resources.
● Enter the IP address of the NTP server where the system synchronizes in CONFIGURATION mode.
ntp server ip-address
View system clock state
OS10(config)# do show ntp status
system peer: 0.0.0.0
system peer mode: unspec
leap indicator: 11
stratum: 16
precision: -22
root distance: 0.00000 s
root dispersion: 1.28647 s
reference ID: [73.78.73.84]
reference time: 00000000.00000000 Mon, Jan 1 1900 0:00:00.000
system flags: monitor ntp kernel stats
jitter: 0.000000 s
stability: 0.000 ppm
broadcastdelay: 0.000000 s
authdelay: 0.000000 s
194
System management