API Guide

Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)#
Supported
Releases
10.2.0E or later
link-bundle-utilization
Configures link-bundle utilization.
Syntax
link-bundle-utilization trigger-threshold value
Parameters value — Enter the percentage of port-channel bandwidth that triggers traffic monitoring on port-
channel members, from 0 to 100.
Default Disabled
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# link-bundle-utilization trigger-threshold 10
Supported
Releases
10.2.0E or later
mode
Configures a front-panel unified port group to operate in Fibre Channel or Ethernet mode, or a QSFP28-DD or QSFP28 port
group to operate in Ethernet mode, with the specified speed on activated interfaces.
Syntax
mode {Eth {100g-2x | 100g-1x | 50g-2x | 40g-2x | 40g-1x | 25g-8x [fabric-
expander-mode] | 25g-4x | 10g-8x | 10g-4x} | FC {32g-4x | 32g-2x | 32g-1x |
16g-4x}}
Parameters
● mode Eth — Configure a port group in Ethernet mode and set the speed to:
○ 100g-2x — Split a QSFP28-DD port into two 100GE interfaces.
○ 100g-1x — Reset a QSFP28 port group to 100GE mode.
○ 50g-2x — Split a QSFP28 port into two 50GE interfaces.
○ 40g-2x — Split a port group into two 40GE interfaces.
○ 40g-1x — Set a port group to 40G mode for use with a QSFP+ 40GE transceiver.
○ 25g-8x fabric-expander-mode — Split a QSFP28-DD port into eight 25GE interfaces for
connection to a Fabric Expander.
○ 25g-8x — Split a port group into eight 25GE interfaces.
○ 25g-4x — Split a port group into four 25GE interfaces.
○ 10g-8x — Split a port group into eight 10GE interfaces.
○ 10g-4x — Split a port group into four 10GE interfaces.
● mode FC — Configure a port group in Fibre Channel mode and set the speed to:
○ 32g-4x — Split a port group into four 32GFC interfaces.
○ 32g-2x — Split a port group into two 32GFC interfaces, subports 1 and 3.
○ 32g-1x — Split a port group into one 32GFC interface, subport 1.
○ 16g-4x — Split a port group into four 16GFC interfaces; supports 4x32GFC oversubscription.
Default S4148U-ON: Depends on the port profile activated.
MX9116n Fabric Switching Engine:
● QSFP28-DD port groups 1 to 9 operate in 8x25GE fabric-expander mode (FEM).
Interfaces 291