API Guide

OS10(conf-vfabric-10)# fcoe fka-adv-period 8
OS10(conf-vfabric-10)# fcoe vlan-priority 3
Supported
Releases
10.3.1E or later
fcoe delay fcf-adv
Delay the Multicast Discovery Advertisement from FCFs to be sent to Enodes.
Syntax
fcoe delay fcf-adv timeout
Parameters
timeout - Timeout range specified in seconds. Range is 1 to 30 seconds.
Default Not configured
Command Mode Global config
Usage
Information
Time to wait after the last FCF connects to the NPG switch to send the Multicast discovery
Advertisement. This command is supported in NPG mode.
Example
OS10(config)# fcoe delay fcf-adv 16
Supported
Releases
10.4.0E(R1) or later In previous releases, the command is not available in full switch mode. From this
release, the command is available both in full switch mode and fabric mode.
name
Configures a vfabric name.
Syntax
name vfabric-name
Parameters vfabric-name — Enter a name for the vfabric.
Defaults Not configured
Command Mode Vfabric CONFIGURATION
Usage
Information
The no version of this command removes the vfabric name..
Example
OS10(config)# vfabric 100
OS10(conf-vfabric-100)# name test_vfab
Supported
Releases
10.3.1E or later
Re-balance the FC sessions
Rebalances the FC sessions across FC uplinks.
Syntax
re-balance fc npg sessions vfabric vfabric-id [dry-run][brief]
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Triggers the load balancing mechanism to redistribute the sessions across the FC uplinks.
Fibre Channel 381