API Guide

Type Boot Type Active Standby Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [B] 10.5.0.0 [A] 10.5.0.0 [B] active
Example (Detail)
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: B
Active SW Version: 10.5.0.0
Active SW Build Version: 10.5.0.270
Active Kernel Version: Linux 4.9.168
Active Build Date/Time: 2019-07-29T23:35:01Z
Standby Partition: A
Standby SW Version: 10.5.0EX
Standby SW Build Version: 10.5.0EX.252
Standby Build Date/Time: 2019-07-27T17:31:55Z
Next-Boot: active[B]
Supported
Releases
10.2.0E or later
show image firmware
Displays any pending firmware upgrades and the status of past firmware upgrades.
Syntax
show image firmware
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
If you install an OS10 firmware file, the firmware upgrade is stored as a pending installation until you
reload the switch. To view the contents of the firmware upgrade, use the show image firmware
command. No entries are displayed in the show command output if there are no pending or past firmware
upgrades available.
Example
OS10# show image firmware
Upgrade State: pending reload (staged)
Pending Firmware Upgrade(s)
# Name
Version Date
-- --------------------------------------------------------
1 onie-firmware-x86_64-dellemc_mxseries-r0.3.35.5.1-17.bin
3.35.5.1 2019-03-25 15:19:19
2 cpld-fw-mx5108n-r1.5.4.1.bin
1.5.4.1 2019-03-25 15:19:19
3 bios-20190225-xt-3.34.8.10a.bin
3.34.8.10 2019-03-25 15:19:19
Past Firmware Upgrade(s)
Name
Version Result
--------------------------------------------------------
onie-firmware-x86_64-dellemc_mxseries-r0.3.35.5.1-15.bin
3.35.5.1 Success
onie-updater-x86_64-dellemc_mxseries-r0
3.35.1.1 Success
OS10# show image firmware
Pending Firmware Upgrade(s)
====================================
40
Getting Started with Dell EMC SmartFabric OS10