API Guide

● MAC parameters: source-mac destination-mac ethertype vlan-id
● TCP/UDP parameters: l4-destination-port l4-source-port
The no version of this command resets the value to the default.
Example
(Ingress)
OS10(config)# load-balancing ingress-port enable
Example (IP
Selection)
OS10(config)# load-balancing ip-selection destination-ip source-ip
Supported
Releases
10.2.0E or later
show enhanced-hashing resilient-hashing
Displays the status of the enhanced-hashing command.
Syntax
show enhanced-hashing resilient-hashing {lag | ecmp}
Parameters lag | ecmp—Enter the keyword to view enhanced-hashing for a port channel or ECMP group.
Default Disabled
Command Mode EXEC
Usage
Information
None
Example
OS10# show enhanced-hashing resilient-hashing lag
Resilient Hashing Configuration For LAG:
----------------------------------------
LAG Resilient hashing : Disabled
OS10# show enhanced-hashing resilient-hashing ECMP
Resilient Hashing Configuration For ECMP:
----------------------------------------------
ECMP Resilient hashing : Disabled
Supported
Releases
10.4.3.0 or later
show hash-algorithm
Displays hash-algorithm information.
Syntax
show hash-algorithm
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show hash-algorithm
EcmpAlgo - crc LabAlgo - crc
Supported
Releases
10.3.0E or later
658 Layer 3