API Guide
configure
Enters CONFIGURATION mode from EXEC mode.
Syntax
configure {terminal}
Parameters terminal — Enters CONFIGURATION mode from EXEC mode.
Default Not configured
Command Mode EXEC
Usage
Information
Enter conf t for auto-completion.
Example
OS10# configure terminal
OS10(config)#
Supported
Releases
10.2.0E or later
copy
Copies the current running configuration to the startup configuration and transfers files between an OS10 switch and a remote
device.
Syntax
copy running-configuration [startup-configuration | config://filepath |
coredump://filepath | ftp://filepath | home://filepath | scp://filepath |
sftp://filepath | supportbundle://filepath | severity-profile profile-name
| tftp://filepath | http://filepath | https://filepath | usb://filepath]
Parameters
● running-configuration startup-configuration—(Optional) Copy the current running
configuration file to the startup configuration file.
● config://filepath—(Optional) Copy from the configuration directory
● coredump://filepath—(Optional) Copy from the coredump directory
● ftp://userid:passwd@hostip/filepath—(Optional) Copy from a remote FTP server
● home://username/filepath—(Optional) Copy from the home directory
● scp://userid:passwd@hostip/filepath—(Optional) Copy from a remote SCP server
● sftp://userid:passwd@hostip/filepath—(Optional) Copy from a remote SFTP server
● supportbundle://filepath—(Optional) Copy from the support-bundle directory
● severity-profile://filepath—(Optional) Copy from the severity-profile directory
● tftp://hostip/filepath—(Optional) Copy from a remote TFTP server
● http://hostip/filepath—(Optional) Copy from a remote HTTP server
● https://hostip/filepath—(Optional) Copy from a remote HTTPS server
● usb:filepath—(Optional) Copy from a USB file system
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to perform the following tasks:
● Save the running configuration to the startup configuration.
● Transfer coredump files to a remote location.
● Back up the startup configuration
● Retrieve a previously backed-up configuration.
● Replace the startup configuration file.
● Transfer support bundles
70 CLI Basics