API Guide

Figure 10. Object tracking
Interface tracking
You can create an object that tracks the line-protocol state of an L2 interface, and monitors its operational up or down status.
You can configure up to 500 objects. Each object is assigned a unique ID.
When the link-level status goes down, the tracked resource status is also considered Down. If the link-level status goes up, the
tracked resource status is also considered Up. For logical interfaces such as port-channels or VLANs, the link-protocol status is
considered Up if any physical interface under the logical interface is Up.
The list of available interfaces include:
● ethernet — Physical interface
● port-channel — Port-channel identifier
● VLAN — Virtual local area network (VLAN) identifer
● Loopback — Loopback interface identifier
● mgmt — Management interface
1. Configure object tracking in CONFIGURATION mode, from 1 to 500.
track object-id
Layer 3
745