API Guide

Usage
Information
The no version of this command resets the query interval to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-interval 120
Supported
Releases
10.4.1.0 or later
ip igmp snooping query-max-resp-time
Configures the maximum time for responding to a query advertised in IGMP queries.
Syntax
ip igmp snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-max-resp-time 15
Supported
Releases
10.4.1.0 or later
ip igmp version
Configures IGMP version.
Syntax
ip igmp version version-number
Parameters version-number—Enter the version number as 2 or 3.
Default 3
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the version number to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp version 2
Supported
Releases
10.4.1.0 or later
show ip igmp groups
Displays the IGMP groups.
Syntax
show ip igmp [vrf vrf-name] groups [group-address [detail] | detail |
interface-name [group-address [detail]]]
Parameters
● vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
● group-address—Enter the group address in dotted decimal format to view specific group
information.
● interface-name—Enter the interface name.
Multicast 789