API Guide

The show ip igmp groups command output displays the IGMP database.
AG1# show ip igmp groups
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Mode
Uptime Expires Last Reporter
225.1.1.1 vlan11 Exclude
00:01:55 00:01:53 0.0.0.0
The show ip pim tib command output displays the PIM tree information base (TIB).
AG1# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:02:05, expires 00:00:54, RP 103.0.0.3, flags: SCJ
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:02:05/Never
The show ip pim mcache command output displays multicast route entries.
AG1# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
AG1-VLT-NODE-1# show ip pim mcache vlt
PIM Multicast Routing Cache Table
Flags: S - Synced
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
The following show command output displays traffic after traffic flow is established:
The show ip pim tib command shows the PIM tree information base.
AG1# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:10:15, expires 00:00:44, RP 103.0.0.3, flags: SCJ
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:10:15/Never
(16.0.0.10, 225.1.1.1), uptime 00:00:55, expires 00:02:34, flags: CT
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:00:55/Never
Multicast
843