API Guide

Outgoing interface list:
vlan11 Forward/Sparse 00:02:15/Never
The show ip pim mcache command output displays multicast route entries.
AG2# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
AG2# show ip pim mcache vlt
PIM Multicast Routing Cache Table
Flags: S - Synced
(*, 225.1.1.1),flags: S
Incoming interface : vlan12
Outgoing interface list :
vlan11 (S)
The following show command output displays the synchronized states after traffic flow is established:
AG2# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:10:30, expires 00:00:00, RP 103.0.0.3, flags: SC
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:10:30/Never
AG2# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
(16.0.0.10, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
AG2# show ip pim mcache vlt
PIM Multicast Routing Cache Table
Flags: S - Synced
(*, 225.1.1.1),flags: S
Incoming interface : vlan12
Outgoing interface list :
vlan11 (S)
(16.0.0.10, 225.1.1.1),flags: S
Incoming interface : vlan12
Outgoing interface list :
vlan11 (S)
846
Multicast