API Guide

● CR1, CR2, AG1, AG2, AG3, and AG4 are multicast routers.
● CR1 and CR2 are the BSR and RP nodes.
● TR1 and TR2 are IGMP-enabled L2 nodes.
● OSPFv2 is the unicast routing protocol.
CR1 switch
1. Configure RSTP.
CR1(config)# spanning-tree disable
2. Configure the VLT domain.
CR1(config)# interface ethernet 1/1/27:2
CR1(conf-if-eth1/1/27:2)# no switchport
CR1(config)#vlt-domain 128
848
Multicast