API Guide

Example
OS10# clear mac address-table dynamic virtual-network
Supported
releases
10.4.2.0 or later
show mac address-table count extended
Displays the number of MAC addresses learned on all VLANs and VXLAN virtual networks.
Syntax
show mac address-table count extended [interface {ethernet node/slot/
port:subport | port-channel number}]
Parameters
interface
ethernet
node/slot/
port[:subport
]
Display the number of MAC addresses learned on all VLANs and VXLANs on the
specified interface.
interface
port-channel
number
Display the number of MAC addresses learned on all VLANs and VXLANs on the
specified port channel.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the number of MAC address entries learned on all VLANs and VXLAN virtual
networks.
Example
OS10# show mac address-table count extended
MAC Entries for all vlans :
Dynamic Address Count : 10
Static Address (User-defined) Count : 2
Total MAC Addresses in Use: 12
Supported
releases
10.4.2.0 or later
show mac address-table count nve
Displays the number of MAC addresses learned on a VXLAN virtual network or from a remote VXLAN tunnel endpoint.
Syntax
show mac address-table count nve {vxlan-vni vni | remote-vtep ip-address}
Parameters
vxlan-vni vni
Display MAC addresses learned on the specified VXLAN virtual network, from 1 to
16,777,215.
remote-vtep
ip-address
Display MAC addresses learned from the specified remote VTEP.
Default Not configured
Command mode EXEC
Usage
information
Use the clear mac address-table dynamic nve remote-vtep command to delete all MAC
address entries learned from a remote VTEP. Use the clear mac address-table dynamic
virtual-network vn-id command to delete all dynamic MAC address entries learned on a virtual-
network bridge.
Example
OS10# show mac address-table count nve vxlan-vni 1001
MAC Entries for all vlans :
Dynamic Address Count : 1
906 VXLAN