API Guide

Example
OS10# start transaction
Supported
Releases
10.3.1E or later
system
Executes a Linux command from within OS10.
Syntax
system command
Parameters command — Enter the Linux command to execute.
Default Not configured
Command Mode EXEC
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.
Example
OS10# system bash
admin@OS10:~$ pwd
/config/home/admin
admin@OS10:~$ exit
OS10#
Supported
Releases
10.2.0E or later
system-cli disable
Disables the system command.
Syntax
system-cli disable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.3.0. Also
supported in SmartFabric mode starting in release 10.5.0.
The no version of this command enables OS10 system command.
Example
OS10# configure terminal
OS10(config)# system-cli disable
Supported
Releases
10.4.3.0 or later
system-user linuxadmin disable
Disables the linuxadmin account.
Syntax
system-user linuxadmin disable
Parameters None
Default Not configured
Command Mode CONFIGURATION
CLI Basics 93