API Guide

5. (Optional) Enable or disable BFD globally.
The following steps enable or disable BFD configuration in the controller.
a. Click Service Definitions from the left navigation pane.
b. Click the Hardware Devices tab.
c. Click the Edit button in the BFD Configuration.
d. Check or clear the Enable BFD check box and provide the Probe interval, in milliseconds, if required.
After you configure a VMware NSX controller on a server VM, connect to the controller from the VXLAN gateway switch.
For more information about the NSX controller configuration in the VTEP, see Configure a connection to an OVSDB
controller. For more information about NSX controller configuration, see the NSX User Guide from VMware.
Example: VXLAN with a controller configuration
This example shows a simple NSX controller and an hardware OS10 VTEP deployed in VXLAN environment.
VXLAN
995