Users Guide

Example
OS10(conf-route-map)# match metric 429132
Supported
Releases
10.2.0E or later
match origin
Configures a filter to match routes based on the origin attribute of BGP.
Syntax
match origin {egp | igp | incomplete}
Parameters
• egp — Match only remote EGP routes.
• igp — Match only on local IGP routes.
• incomplete — Match on unknown routes that are learned through some other means.
Default Not configured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the match.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# match origin egp
Supported
Releases
10.3.0E or later
match route-type
Configures a filter to match routes based on how the route is defined.
Syntax
match route-type {{external {type-1 | type-2} | internal | local }
Parameters
• external — Match only on external OSPF routes. Enter the keyword then one of the following:
• type–1 — Match only on OSPF Type 1 routes.
• type–2 — Match only on OSPF Type 2 routes.
•
• internal — Match only on routes generated within OSPF areas.
• local — Match only on routes generated locally.
Default Not configured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the match.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# match route-type external type-1
Supported
Releases
10.3.0E or later
match tag
Configures a filter to redistribute only routes that match a specific tag value.
Syntax
match tag tag-value
Parameters tag-value — Enter the tag value to match with the tag number, from 0 to 4294967295.
Default Not configured
1082 Access Control Lists