Users Guide

System management
System banners Provides information to configure a system login and message of the day (MOTD) text banners, see System
banners.
User session
management
Provides information to manage the active user sessions, see User session management.
Telnet server Provides information to set up Telnet TCP/IP connections on the switch, see Telnet server. To set up secure,
encrypted the secure shell (SSH) connections to the switch, see SSH server.
Simple Network
Management
Protocol
Provides a message format for communication between Simple Network Management Protocol (SNMP)
managers and agents. SNMP provides a standardized framework and common language for network monitoring
and device management, see Simple Network Management Protocol.
System clock Provides information to set the system time, see System clock.
Network Time
Protocol
Provides information to synchronize timekeeping between time servers and clients, see NetworkTime Protocol.
Dynamic Host
Configuration
Protocol
Provides information to dynamically assign IP addresses and other configuration parameters to network hosts
based on policies, see Dynamic Host Configuration Protocol.
For information about how to set up a management network that is separate from your production network, see Management Networks
for Dell EMC Networking.
System banners
You can configure a system login and message of the day (MOTD) text banners. The system login banner displays before you log in. The
MOTD banner displays immediately after a successful login. You can also reset the banner text to the Dell EMC default banner or disable
the banner display.
Login banner
Configure a system login banner that displays before you log in using interactive mode. Starting and ending double-quotation marks are
not necessary. Enter a single delimiter character or the key combination ^C to specify the start and end of the text banner.
1. Enter the banner login command with a single delimiter character and press Enter.
2. Enter each line of text and press Enter. Enter a maximum of 4096 characters. There is no limit to the number of lines.
3. Complete the banner configuration by entering a line that contains only the delimiter character.
• Enable a login banner in CONFIGURATION mode. Enclose the delimiters and banner text in double-quotes.
banner login delimiter <Enter>
banner-text <Enter>
banner-text <Enter>
... <
Enter>
delimiter
Configure the login banner
OS10(config)# banner login %
DellEMC S4148U-ON login
Enter your username and password
%
To delete a login banner and reset it to the Dell EMC default banner, use the no banner login command. To disable banner display
before login, use the
banner login disable command.
9
System management 131