Users Guide

clear ip arp inspection statistics
Clear the Dynamic ARP Inspection statistics.
Syntax
clear ip arp inspection statistics [vlan vlan-id]
Parameters
• vlan vlan-id—Enter the VLAN ID. The range is from 1 to 4093.
Defaults None
Command Mode EXEC
Usage Information
This command is accessible to users with sysadmin and secadmin roles.
Example (Global)
OS10# clear ip dhcp snooping binding
Supported
Release
10.5.0 or later or later
clear ip dhcp snooping binding
Clears the dynamic entries in the DHCP snooping binding table.
Syntax
clear ip dhcp snooping binding [mac mac-address] [vlan vlan-id] [interface
{ethernetslot/port/sub-port> | port-channel port-channel-id}]
Parameters
• mac mac-address—Enter the MAC address of the host to which the server is leasing the IP address.
• vlan vlan-id—Enter the VLAN ID. The range is from 1 to 4093.
• interface type—Enter the interface type information. You can enter a physical, a VLAN, or a port-
channel interface.
Defaults None
Command Mode EXEC
Usage Information
This command clears the dynamic entries in the DHCP snooping binding table.
CAUTION: Clearing the DHCP snooping binding table using the clear ip dhcp snooping binding
command also clears the SAV and DAI entries on the system. This affects the traffic from clients
that are connected to the DHCP snooping-enabled VLANs.
Example (Global)
OS10# clear ip dhcp snooping binding
Example (MAC)
OS10# clear ip dhcp snooping binding mac 04:56:79:86:73:fe
Example (Port
Channel)
OS10# clear ip dhcp snooping binding mac 04:56:79:86:73:fe vlan 100 port-
channel 10
Supported
Release
10.5.0 or later or later
ip dhcp snooping (global)
Enables DHCP snooping globally.
Syntax
ip dhcp snooping
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
System management 209