Users Guide

• DSCP value
An integer represents the application type the Type integer, which indicates a device function where a unique network policy is defined.
An individual LLDP-MED network policy TLV generates for each application type that you use with OS10 commands, see Advertise LLDP-
MED TLVs.
NOTE: Signaling is a series of control packets that exchange between an endpoint device and a network-connectivity
device to establish and maintain a connection. These signal packets might require a different network policy than the
media packets where a connection is made. In this case, configure the signaling application.
0 — Reserved —
1 — Voice Used for dedicated IP telephony handsets and other appliances supporting interactive voice services.
2 — Voice
signaling
Used only if voice control packets use a separate network policy than voice data.
3 — Guest voice Used only for a separate limited voice service for guest users with their own IP telephony handsets and other
appliances supporting interactive voice services.
4 — Guest voice
signaling
Used only if guest voice control packets use a separate network policy than voice data.
5 — SoftPhone
voice
Used for softphone application on a device such as a personal computer or laptop. This class does not support
multiple VLANs and if required, uses an untagged VLAN or a single tagged data-specific VLAN.
6 — Video
conferencing
Used only for dedicated video conferencing and similar appliances supporting real-time interactive video.
7 — Streaming
video
Used for broadcast or multicast-based video content distribution and similar applications supporting streaming
video services that require specific network policy treatment.
8 — Video
signaling
Used only if video control packets use a separate network policy than the video data.
9-255 — Reserved —
Define network policies
You can manually define LLDP-MED network policies. LLDP commands that you configure in CONFIGURATION mode are global and
affect all interfaces. LLDP commands that you configure in INTERFACE mode affect only the specific interface.
Create a maximum of 32 network policies, and attach the LLDP-MED network policies to a port.
• Define the LLDP-MED network policy in CONFIGURATION mode.
lldp-med network-policy number app {voice | voice-signaling | guest-voice | guestvoice-
signaling | softphone-voice | streaming-video | video-conferencing | video-signaling}{vlan
vlan-id vlan-type {tag | untag} priority priority dscp dscp value}
Configure LLDP-MED network policy for voice applications
OS10(config)# lldp med network-policy 10
OS10(config)# lldp med network-policy 10 app
OS10(config)# lldp med network-policy 10 app voice
OS10(config)# lldp med network-policy 1 app voice vlan 10 vlan-type tag
OS10(config)# lldp med network-policy 1 app voice-signaling vlan 10 vlan-type tag priority 2
dscp 1
392
Layer 2