Users Guide

Command Mode ROUTER-OSPFv3
Usage Information The no version of this command deletes a stub area.
Example
OS10(config)# router ospfv3 10
OS10(conf-router-ospfv3-10)# area 10.10.1.5 stub
Supported
Releases
10.3.0E or later
auto-cost reference-bandwidth
Calculates default metrics for the interface based on the configured auto-cost reference bandwidth value.
Syntax
auto-cost reference-bandwidth value
Parameters value — Enter the reference bandwidth value to calculate the OSPFv3 interface cost in megabits per second,
from 1 to 4294967.
Default 100000
Command Mode ROUTER-OSPFv3
Usage Information The value set by the ipv6 ospf cost command in INTERFACE mode overrides the cost resulting from the
auto-cost command. The no version of this command resets the value to the default.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# auto-cost reference-bandwidth 150
Supported
Releases
10.3.0E or later
clear ipv6 ospf process
Clears all OSPFv3 routing tables.
Syntax
clear ipv6 ospf {instance-number} [vrf vrf-name] process
Parameters
• instance-number — Enter an OSPFv3 instance number, from 1 to 65535.
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to clear OSPFv3
processes in that VRF.
Default Not configured
Command Mode EXEC
Usage Information None
Example
OS10# clear ipv6 ospf 3 process
Supported
Releases
10.3.0E or later
clear ipv6 ospf statistics
Clears OSPFv3 traffic statistics.
Syntax
clear ipv6 ospf [instance-number] [vrf vrf-name] statistics
Parameters
• instance-number — (Optional) Enter an OSPFv3 instance number, from 1 to 65535.
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to clear OSPFv3
statistics in that VRF.
Default Not configured
Command Mode EXEC
Layer 3 653