Users Guide

Usage Information When an OSPFv3 redistributes, the process is not completely removed from the BGP configuration. The no
version of this command disables the redistribute configuration.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1
Example
(Connected)
OS10((config-router-ospfv3-100)# redistribute connected route-map dell2
Supported
Releases
10.3.0E or later
router-id
Configures a fixed router ID for the OSPFv3 process.
Syntax
router-id ip-address
Parameters ip-address — Enter the IP address of the router as the router ID.
Default Not configured
Command Mode ROUTER-OSPFv3
Usage Information Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the fixed
router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3
adjacency. The new router ID becomes effective immediatley. The no version of this command disables the router
ID configuration.
Example
OS10(config)# router ospfv3 10
OS10(config-router-ospfv3-100)# router-id 10.10.1.5
Supported
Releases
10.3.0E or later
router ospfv3
Enters Router OSPFv3 mode and configures an OSPFv3 instance.
Syntax
router ospfv3 instance-number [vrf vrf-name]
Parameters
• instance-number—Enter a router OSPFv3 instance number, from 1 to 65535.
• vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to configure an OSPFv3
instance in that VRF.
Default Not configured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes an OSPFv3 instance.
Example
OS10(config)# router ospfv3 10 vrf vrf-test
Supported
Releases
10.3.0E or later
show ipv6 ospf
Displays OSPFv3 instance configuration information.
Syntax
show ipv6 ospf [instance-number]
Parameters instance-number — (Optional) View OSPFv3 information for a specified instance number, from 1 to 65535.
Default None
Command Mode EXEC
Layer 3 659