Users Guide

• role role — Enter a user role:
• sysadmin — Full access to all commands in the system, exclusive access to commands that manipulate the file system, and
access to the system shell. A system administrator can create user IDs and user roles.
• secadmin — Full access to configuration commands that set security policy and system access, such as password strength,
AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic
keys, login statistics, and log information.
• netadmin — Full access to configuration commands that manage traffic flowing through the switch, such as routes,
interfaces, and ACLs. A network administrator cannot access configuration commands for security features or view security
information.
• netoperator — Access to EXEC mode to view the current configuration. A network operator cannot modify configuration
settings on a switch.
• priv-lvl privilege-level—Enter a privilege level, from 0 to 15. If you do not specify the priv-lvl option, the system
assigns privilege level 1 for the netoperator user and privilege level 15 for the sysadmin, secadmin, and netadmin users.
The following is an example of configuring privilege levels and assigning them to a user:
OS10(config)# privilege exec priv-lvl 12 "show version"
OS10(config)# privilege exec priv-lvl 12 "configure terminal"
OS10(config)# privilege configure priv-lvl 12 "interface ethernet"
OS10(config)# privilege interface priv-lvl 12 "ip address"
OS10(config)# username delluser password $6$Yij02Phe2n6whp7b$ladskj0HowijIlkajg981 role
secadmin priv-lvl 12
The following example shows the privilege level of the current user:
OS10# show privilege
Current privilege level is 15.
The following example displays the privilege levels of all users who are logged into OS10:
OS10# show users
Index Line User Role Application Idle Login-Time Location Privilege
----- ------ ----- ----- ----------- ---- ----------- -------- ---------
1 pts/0 admin sysadmin bash >24h 2018-09-08 T06:51:37Z 10.14.1.91 [ssh] 15
2 pts/1 netad netadmin bash >24h 2018-09-08 T06:54:33Z 10.14.1.91 [ssh] 10
Configure enable password
After you configure privilege levels for users, assign commands to each level and an enable password to access each level:
1. Configure a privilege level and assign commands to it in CONFIGURATION mode.
privilege mode priv-lvl privilege-level command-string
• mode — Enter the privilege mode used to access CLI modes:
• exec — Accesses EXEC mode.
• configure — Accesses class-map, DHCP, logging, monitor, openflow, policy-map, QOS, support-assist, telemetry, CoS,
Tmap, UFD, VLT, VN, VRF, WRED, and alias modes.
• interface — Accesses Ethernet, fibre-channel, loopback, management, null, port-group, lag, breakout, range, port-channel,
and VLAN modes.
• route-map — Accesses route-map mode.
• router — Accesses router-bgp and router-ospf modes.
• line — Accesses line-vty mode.
• priv-lvl privilege-level — Enter the number of a privilege level, from 2 to 14.
• command-string — Enter the command supported at the privilege level.
For sysadmin, netadmin, and secadmin roles, you cannot configure a privilege level less than 2 .
2. Configure an enable password for each privilege level in CONFIGURATION mode.
enable password encryption-type password-string priv-lvl privilege-level
• encryption-type — Enter an encryption type for the password entry:
• 0 — Use plain text with no password encryption.
Security
935