Users Guide
fec
Congures Forward Error Correction on 25G, 50G, and 100G interfaces.
Syntax
fec {CL74-FC | CL91-RS | CL108-RS | off}
Parameters
• CL74-FC — Supports 25G and 50G
• CL91-RS — Supports 100G
• CL108-RS — Supports 25G and 50G
• off — Disables FEC
Defaults
• For 25G and 50G interfaces: o
• For 100G interfaces: CL91-RS
Command Mode CONFIGURATION
Usage Information
The no version of this command resets the value to the default.
Example
OS10(config)# interface ethernet 1/1/41
OS10(conf-if-eth1/1/41)# fec CL91-RS
Supported Releases 10.3.0E or later
interface ethernet
Congures a physical Ethernet interface.
Syntax
interface ethernet node/slot/port:subport
Parameters node/slot/port:subport — Enter the Ethernet interface information.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the interface.
Example
OS10(config)# interface ethernet 1/1/10:1
OS10(conf-if-eth1/1/10:1)#
Supported Releases 10.2.0E or later
interface loopback
Congures a loopback interface.
Syntax
interface loopback id
Parameters id — Enter the loopback interface ID number (0 to 16383).
Default Not congured
Interfaces 115