Users Guide

show switch-operating-mode
Displays the current operating mode of a supported switch.
Syntax
show switch-operating-mode
Parameters None
Command Mode EXEC
Usage Information Some OS10 switches operate in Full Switch and SmartFabric modes. The default is Full Switch mode.
Example
OS10# show switch-operating-mode
Switch-Operating-Mode : Smart Fabric Mode
Supported Releases 10.4.0E(R3S) or later
show switch-port-prole
Displays the current and default port prole on a switch.
Syntax
show switch-port-profile node/slot
Parameters
• node/slot — Enter the switch information. For a standalone switch, enter 1/1.
Default
profile-1
Command Mode EXEC
Usage Information A switch-port prole determines the available front-panel ports and breakout modes on Ethernet and unied ports.
To display the current port prole, enter the show switch-port-profile command. To reset the switch to
the default port prole, enter the no switch-port-profile node/slot command.
Example
OS10(config)# show switch-port-profile 1/1
| Node/Unit | Current | Next-boot | Default |
|-------------+-------------------+-------------------|
| 1/1 | profile-2 | profile-2 | profile-1 |
Supported Profiles:
profile-1
profile-2
profile-3
profile-4
profile-5
profile-6
Supported Releases 10.3.1E or later
show unit-provision
Displays the unit ID and service tag of the Fabric Expanders attached to a Fabric Switching Engine.
Syntax
show unit-provision
126 Interfaces