Users Guide

Supported Releases 10.2.0E or later
local-as
Congures a local AS number for a peer.
Syntax
local-as as-number [no-prepend]
Parameters
• as-number—Enter the local AS number, from 1 to 4294967295.
• no-prepend—(Optional) Enter so that local AS values are not prepended to announcements from the
neighbor.
Default Disabled
Command Mode ROUTER-NEIGHBOR or ROUTER-TEMPLATE
Usage Information Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of
this command resets the value to the default.
Example (Neighbor)
OS10(conf-router-bgp-10)# neighbor lunar
OS10(conf-router-neighbor)# local-as 20
Example (Template)
OS10(conf-router-bgp-10)# template solar
OS10(conf-router-template)# local-as 20
Supported Releases 10.3.0E or later
log-neighbor-changes
Enables logging for changes in neighbor status.
Syntax
log-neighbor-changes
Parameters None
Default Enabled
Command Mode ROUTER-BGP
Usage Information OS10 saves logs which includes the neighbor operational status and reset reasons. To view the logs, use the show
bgp config command. The no version of this command disables the feature.
Example
OS10(conf-router-bgp-10)# log-neighbor-changes
Supported Releases 10.3.0E or later
maximum-paths
Congures the maximum number of equal-cost paths for load sharing.
Syntax
maximum-paths [ebgp number | ibgp number] maxpaths
Parameters
• ebgp—Enable multipath support for external BGP routes.
• ibgp—Enable multipath support for internal BGP routes.
Layer 3 309