Users Guide

Table Of Contents
k. Apply QoS configurations on the interface connected to FSB2.
FCF(config)# interface ethernet 1/1/13
FCF(conf-if-eth1/1/13)# priority-flow-control mode on
FCF(conf-if-eth1/1/13)# ets mode on
FCF(conf-if-eth1/1/13)# trust-map dot1p default
FCF(conf-if-eth1/1/13)# qos-map traffic-class tc-q-map1
FCF(conf-if-eth1/1/13)# service-policy input type network-qos nqpolicy
FCF(conf-if-eth1/1/13)# service-policy output type queuing ets_policy
Verify multi-hop FSB configuration
Verify the configuration using the following show commands:
To verify FSB mode and the CVL status, use the show fcoe system command.
FSB1# show fcoe system
Mode : FSB
CVL Status : Enabled
FCOE VLAN List (Operational) : 777
FCFs : 1
Enodes : 2
Sessions : 2
To verify the discovered ENodes, use the show fcoe enode command.
FSB1# show fcoe enode
Enode MAC Enode Interface VLAN FCFs Sessions
-----------------------------------------------------------------
32:03:cf:45:00:00 Eth 1/1/31 777 1 1
f4:e9:d4:f9:fc:40 Eth 1/1/5 777 1 1
To verify the discovered FCFs, use the show fcoe fcf command.
FSB1# show fcoe fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No.
of Enodes FCF Mode
--------------------------------------------------------------------------------------
------------------------
14:18:77:20:86:ce Eth 1/1/2 777 0e:fc:00 8000
2 F
FSB2# show fcoe fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No.
of Enodes FCF Mode
--------------------------------------------------------------------------------------
------------------------
14:18:77:20:86:ce Eth 1/1/13 777 0e:fc:00 8000
0 FT
To verify the list of FCoE sessions, use the show fcoe sessions command.
FSB1# show fcoe sessions
Enode MAC Enode Interface FCF MAC FCF interface VLAN FCoE
MAC FC-ID PORT WWPN
PORT WWNN
--------------------------------------------------------------------------------------
-------------------------
32:03:cf:45:00:00 Eth 1/1/31 14:18:77:20:86:ce Eth 1/1/2 777
0e:fc:00:05:00:05 05:00:05 33:00:55:2c:cf:55:00:00
23:00:55:2c:cf:55:00:00
f4:e9:d4:f9:fc:40 Eth 1/1/5 14:18:77:20:86:ce Eth 1/1/2 777
0e:fc:00:02:01:00 02:01:00 20:01:f4:e9:d4:a4:7d:c3
20:00:f4:e9:d4:a4:7d:c3
To verify the name server entries on the FCF, use the show fc ns switch brief command.
FCF# show fc ns switch brief
Total number of devices = 3
462
Fibre Channel