Users Guide

to download the latest device drivers associated with
firmware update.
c. If the current version is 1.00.01 or 1.00.10, an update to
the bridge version 1.10.00 or 1.10.10 is required before
updating to 10.10.20. Follow the steps to update to
1.10.10.
NOTE: Updating to 1.1.x may log alert HWC7522 and
require MX7116n or PTM IOMs to be rebooted.
.
i. From the global menu, click Devices and select
Chassis from the dropdown.
ii. This list all the Chassis devices.
iii. Select the checkbox to select all the Chassis in
the current page. If there are multiple pages, then
navigate to each page and select the checkbox.
iv. Once all the Chassis devices in all the pages are
selected, click "
Update Firmware " menu button.
v. In the popup wizard, select the individual package
and click Browse button to select the "OpenManage
Enterprise Modular" 1.10.10 DUP.
vi. Once the DUP is uploaded, click Next and select the
top Compliance checkbox. Click Finish to start the
update on all Chassis.
vii. Allow the job to complete.
d. Current version is either 1.10.00 or 1.10.10 .
i. From the global menu, click Devices and select
Chassis from the dropdown.
ii. This list all Chassis devices.
iii. Select the checkbox to select all the Chassis on
the current page. If there are multiple pages, then
navigate to each page and select the checkbox.
iv. Once all the Chassis devices in all the pages are
selected, click "
Update Firmware " menu button.
v. In the popup wizard, select the individual package
and click Browse button to select the "OpenManage
Enterprise Modular" 1.10.20 DUP.
vi. Once the DUP is uploaded, click Next and select
the
Compliance checkbox. Click Finish to start the
update on all Chassis.
vii. Allow the job to complete.
5.
Update the "Fabric Switching Engine" and "Ethernet
Switch" components.
a. Collect the following information required to execute the
updates.
i. Identify and note the Switch SERVICE-TAG and its
ROLE in the smart fabric cluster by executing the
"show smartfabric cluster" command in the Switch
CLI. This command is executed on all the switches in
single or multi chassis group.
Sample output from a Chassis-group Member:
MX9116N-A1# show smartfabric cluster
------------------------------------
----------------------
CLUSTER DOMAIN ID : 159
VIP :
fde1:53ba:e9a0:de14:0:5eff:fe00:1159
ROLE : BACKUP
SERVICE-TAG : MXWV011
68 Getting Started with Dell EMC SmartFabric OS10