Setup Guide

61 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
ethernet1/1/38 C160A2 ethernet1/1/38 20:04:0f:00:a1:9e
ethernet1/1/39 C160A2 ethernet1/1/39 20:04:0f:00:a1:9e
ethernet1/1/40 C160A2 ethernet1/1/40 20:04:0f:00:a1:9e
ethernet1/1/41 Z9100-Leaf1 ethernet1/1/3 4c:76:25:e8:f2:c0
ethernet1/1/42 Z9100-Leaf2 ethernet1/1/3 4c:76:25:e8:e8:40
ethernet1/71/1 Not Advertised 24:6e:96:9c:e5:d8 24:6e:96:9c:e5:d8
ethernet1/71/1 iDRAC-CF52XM2 CF52XM2 NIC.Mezzanine.1A-1-1 d0:94:66:29:fe:b4
ethernet1/71/2 Not Advertised 24:6e:96:9c:e5:da 24:6e:96:9c:e5:da
ethernet1/71/2 iDRAC-1S34MN2 1S34MN2 NIC.Mezzanine.1A-1-1 d0:94:66:29:ff:27
8.4.5 show qos system
The show qos system command displays the QoS configuration applied to the system. The command is
useful to verify the service policy created manually or automatically by a SmartFabric deployment.
C140A1# show qos system
Service-policy (input): PM_VLAN
ETS Mode : off
8.4.6 show policy-map
Using the service policy from show qos system, the show policy-map type qos PM_VLAN
command displays QoS policy details including associated class maps, for example,
CM10, and QoS queue
settings,
qos-group 2.
C140A1# show policy-map type qos PM_VLAN
Service-policy (qos) input: PM_VLAN
Class-map (qos): CM10
set qos-group 2
8.4.7 show class-map
The command show class-map displays details for all the configured class-maps. For example, the
association between
CM10 and VLAN 10 is shown.
C140A1# show class-map
Class-map (application): class-iscsi
Class-map (qos): class-trust
Class-map (qos): CM10(match-any)
Match: mac vlan 10
Class-map (qos): CM2(match-any
8.4.8 show vlt domain-id
The show vlt domain-id command validates the VLT configuration status. The role of one switch in
the VLT pair is primary (not shown), and its peer switch is assigned the secondary role. The VLT domain ID of
255 is automatically configured in SmartFabric mode. The VLTi link Status and VLT Peer Status must both be
up. SmartFabric automatically configures the VLTi as port channel 1000.
MX9116n-1# show vlt 255
Domain ID : 255
Unit ID : 1
Role : secondary