Setup Guide

91 Dell EMC PowerEdge MX SmartFabric Configuration and Troubleshooting Guide
11.6.1.3 Verify ACI is learning endpoints
To verify ACI is learning endpoints, do the following:
1. In the APIC GUI, go to Tenants > Tenant name > Application Profiles > Application Profile
name > Application EPGs > select an Application EPG.
2. Click the Operational tab in the navigation window as shown in Figure 82.
Cisco ACI endpoints in appEPG1
3. All learned endpoints for the selected EPG are displayed along with their VLAN, IP address, and
interface.
4. Repeat the steps above for the remaining Application EPGs.