Users Guide

lldp med fast-start-repeat-count
Configures the number of packets that are sent during the activation of the fast start mechanism.
Syntax
lldp-med fast-start-repeat-count number
Parameters number — Enter the number of packets sent during the activation of the fast start mechanism, from 1 to
10.
Default 3
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# lldp med fast-start-repeat-count 5
Supported
Releases
10.2.0E or later
lldp med
Enables or disables LLDP-MED on an interface.
Syntax
lldp med {enable | disable}
Parameters
● enable — Enable LLDP-MED on the interface.
● disable — Disable LLDP-MED on the interface.
Default Enabled with network-policy TLV
Command Mode INTERFACE
Usage
Information
LLDP-MED communicates the types of TLVs that the endpoint device and network-connectivity device
support. Use the no lldp med or lldp med disable command to disable LLDP-MED on a specific
interface.
Example
OS10(conf-if-eth1/1/1)# lldp med disable
Supported
Releases
10.2.0E or later
lldp med network-policy
Manually defines an LLDP-MED network policy.
Syntax
lldp med network-policy number app {voice | voice-signaling | guest-voice |
guestvoice-signaling | softphone-voice | streaming-video | video-
conferencing | video-signaling} {vlan vlan-id vlan-type {tag | untag}
priority priority dscp dscp value}
Parameters
● number — Enter a network policy index number, from 1 to 32.
● app — Enter the type of applications available for the network policy:
○ voice — Voice network-policy application
○ voice-signaling — Voice-signaling network-policy application
○ guest-voice — Guest voice network-policy application
○ guestvoice-signaling — Guest voice signaling network policy application
○ softphone-voice — SoftPhone voice network-policy application
○ streaming-video — Streaming video network-policy application
488 Layer 2