Release Notes

Figure 3. Dell EMC VEP1405 setup prompt timeout screen

3. From the Setup Prompt Timeout field, use the keyboard to enter the time.

4. Press F4 to save the changes made.

5. Using the arrow keys, select the Main tab.

Figure 4. Dell EMC VEP1405 BIOS main screen

Boot order

The BIOS looks for a bootable image in the Boot order setting list. The BIOS then loads and boots the image. To access the boot

order setting from the BIOS setup screen, select the Boot tab, and then select Boot Option Priorities.

Figure 5. Example of VEP1425 system boot order screen

USB 3.0

To support universal serial bus (USB) 3.0 in operating systems, set the extensible host controller interface (xHCI) XHCI Hand-

off option to enabled. To adjust this setting, access the BIOS setup screen and use the arrow keys to select the Advanced tab,

and then select USB Configuration.

NOTE: If the BIOS must support USB 2.0 devices, or legacy USB devices, leave the Legacy USB Support set to Enabled.