Release Notes

platform found vep1400
platform vep1400 is supported.
console port ttyS0
****************************
Select Installation Device
****************************
1.SSD
2.USB Disk
3.eMMC
0.Quit
---------------------------
Please select the device type that DIAG OS will be install on : 3
Install Diag OS on eMMC
Checking device /dev/mmcblk0 size...
ok
ls: /boot/efi/EFI/*: No such file or directory
Found EDA-DIAG partition on device /dev/mmcblk0p2
File /tmp/diag_os_install_mode exists, forcing install mode
Diag OS Installer Mode : INSTALL
Installing diag-os on mmc device
Checking mmc device presence...
ok
Initializing mmc device
Clearing GPT and MBR data structures
GPT data structures destroyed! You may now partition the disk using fdisk or
other utilities.
Clearing GPT and MBR data structures...ok
creating GPT disk label
Creating new GPT entries.
The operation has completed successfully.
creating GPT disk label...ok
Creating ESP on partition 1. size 128MB with label EFI System
Creating ESP on partition...ok
Creating file-system(vfat) on esp device /dev/mmcblk0p1 with label EFI System
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.26 (2014-03-07)
Creating file-system(vfat) on esp...ok
Creating diags partition 2 size 2048MB with label EDA-DIAG
Creating diags partition...ok
Creating file-system on diags partition
mke2fs 1.42.13 (17-May-2015)
Discarding device blocks: done
Creating filesystem with 524288 4k blocks and 131072 inodes
Filesystem UUID: cb4b61a0-75c4-429d-ae5d-26aed0ffdf11
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
Creating file-system on diags partition...ok
Mounted /dev/mmcblk0p2 on /tmp/tmp.f01Ji8
Preparing /dev/mmcblk0p2 EDA-DIAG for rootfs install
untaring into /tmp/tmp.f01Ji8
rootfs copy done
Success: Support tarball created: /tmp/tmp.f01Ji8/onie-support-
dellemc_vep1400_c3538.tar.bz2
Updating diag-os ver in system-eeprom
Diagos ver 3.43.3.81-19
Deleting TLV 0x2e: Diag Version
Adding TLV 0x2e: Diag Version
20