Release Notes

BIOS setup
NOTE: To enter the Setup Menu, you must enter the required password. By default, this password consists of the system
Service Tag number followed by an exclamation point. For example, if the system Service Tag number is A1B2C3D, the
default password would be A1B2C3D!. If you do not enter a password when prompted, you can still access the Setup Menu,
however access to certain functions is restricted.
To enter the BIOS setup, perform the following steps:
1. After the system reboots, immediately press the Delete key.
NOTE: By default, the ability to enter the BIOS setup once the boot process starts, is set at three seconds.
2. Using the arrow keys on the keyboard, select the Boot tab.
Figure 3. Dell EMC VEP1405 setup prompt timeout screen
3. From the Setup Prompt Timeout field, use the keyboard to enter the time.
4. Press F4 to save the changes made.
5. Using the arrow keys, select the Main tab.
Figure 4. Dell EMC VEP1405 BIOS main screen
Boot order
The BIOS looks for a bootable image in the Boot order setting list. The BIOS then loads and boots the image. To access the boot
order setting from the BIOS setup screen, select the Boot tab, and then select Boot Option Priorities.
Figure 5. Example of VEP1425 system boot order screen
14