Release Notes

ParamValue : 01
Dump(Tx):
01 36 FE 04 02 04 01 01
------------------------------------------------------------------------------
[15]: <Rx> - 01:46:32.757019
Type : 0x04 (Event)
EventCode : 0xFF (HCI_LE_ExtEvent)
Data Length : 0x06 (6) (byte(s))
Event : 0x067F (1663) (GAP_HCI_ExtensionCommandStatus)
Status : 0x00 (0) (SUCCESS)
OpCode : 0xFE36 (GAP_BondSetParam)
DataLength : 0x00 (0)
Dump(Rx):
04 FF 06 7F 06 00 36 FE 00
------------------------------------------------------------------------------
[16]: <Tx> - 01:46:32.802238
Type : 0x01 (Command)
OpCode : 0xFE36 (GAP_BondSetParam)
Data Length : 0x04 (4) (byte(s))
ParamID : 0x0406 (GAPBOND_BONDING_ENABLED)
ParamLength : 0x01 (1)
ParamValue : 01
Dump(Tx):
01 36 FE 04 06 04 01 01
------------------------------------------------------------------------------
[17]: <Rx> - 01:46:32.808350
Type : 0x04 (Event)
EventCode : 0xFF (HCI_LE_ExtEvent)
Data Length : 0x06 (6) (byte(s))
Event : 0x067F (1663) (GAP_HCI_ExtensionCommandStatus)
Status : 0x00 (0) (SUCCESS)
OpCode : 0xFE36 (GAP_BondSetParam)
DataLength : 0x00 (0)
Dump(Rx):
04 FF 06 7F 06 00 36 FE 00
Welcome to bttool. Please type "help" or "?" to list commands.
[bttool]# quit
Wi-Fi (for select models only)
root@dellemc-diag-os:~# ath10k.sh
##################### ath10k.sh version (Release Date: 2019/4/17 9:30AM)
#####################
1. Usage
Example:
ath10k.sh version
ath10k.sh help
ath10k.sh stop
2. Configure the wireless interface to Acess Point or Wireless Station.
Usage: ath10k.sh [options]
Options:
-e [wired Interface] : ethX (default: eth0)
-i [wireless Interface] : wlanX (default: wlan0)
-m [wireless Mode] : ap/sta (default: ap)
-b [wireless Band] : 2.4/5 (default: 5)
-g [wireless 11g Mode] : on/off (default: on)
-s [Wireless SSID] : Strings (Length: expected 1 .. 64)
9