Release Notes

● Wall mount placement

● Rack-mounted using the optional rack mount tray

Desktop placement

The VEP1405 series includes four rubber feet that provide secure and stable placement of the unit on a flat surface.

Figure 3. VEP1405 series desktop placement

Wall mount installation

The VEP1405 series includes the hardware that is required for wall mount installation. Using a torque screwdriver, affix the wall

mount brackets to the VEP1405 series using the four M3 screws included.

NOTE:

When driving the screws into the bracket and VEP1405 series unit, verify that 5 lb-in is the achieved torque

setting.

NOTE: If mounting the VEP1405 series to the wall using the wall mount bracket provided, removal of the rubber feet from

the bottom of the VEP1405 series unit is not necessary.

The VEP1405 series of systems include a wall mount bracket with cross-shaped cutout for the mounting screws. The wall mount

bracket includes cross-shaped cutouts for the mounting screws.

Wall mount bracket with cross-shaped cutout for the mounting screws

Figure 4. VEP1405 series wall mount installation - cross-shaped cutout

To mount the VEP1405 series unit to the wall using the wall mount bracket provided, you must first anchor the screws into the

wall surface. Depending on the type of wall surface, use the M3 screw and anchor to ensure a secure installation. The

recommended M3 screw dimensions are as follows:

System overview