Dell EMC OpenManage Ansible Modules Version 1.0 Installation Guide February 2018 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Prerequisites......................................................................................................................................................................... 4 OpenManage Ansible Modules Support Matrix............................................................................................................
1 Overview Dell EMC OpenManage Ansible Modules allows Data Center and IT administrators to use RedHat Ansible to automate and orchestrate the configuration, deployment, and update of Dell EMC PowerEdge Servers (12th generation of PowerEdge servers and later) by leveraging the management automation capabilities in-built into the integrated Dell Remote Access Controller (iDRAC). This installation guide provides information about installation and uninstallation of Dell EMC OpenManage Ansible Modules.
2 Installing Dell EMC OpenManage Ansible Modules version 1.0 About this task To install Dell EMC OpenManage Ansible Modules version 1.0: Steps 1. Go to Dell.com/Support/Home. 2. In the Choose from all products section, click Software & Security. 3. In the Software & Security group box, click Enterprise Systems Management. 4. To download the product, click the required product version. The Product Support page is displayed. 5. Download the DellEMC_OpenManage_Ansible_Modules_version_1.
3 Uninstalling Dell EMC OpenManage Ansible Modules version 1.0 About this task To uninstall Dell EMC OpenManage Ansible Modules version 1.0: Steps 1. Navigate to the directory DellEMC_OpenManage_Ansible_Modules_version_1.0.106. 2. Run python uninstall.py. If you are using python version 3.x, then run python3 uninstall.py. Results Dell EMC OpenManage Ansible Modules version 1.0 is uninstalled successfully. 6 Uninstalling Dell EMC OpenManage Ansible Modules version 1.
