Users Guide

Table 11. dellemc_configure_idrac_users (continued)
share_pwd Yes NA NA Network share user password
share_mnt Yes NA NA
Local mount path of the network share
with read-write permission for ansible
user
action No create
● create
● delete
● modify
This value decides whether to create or
delete or modify iDRAC user
user_name No NA NA
Provide the username to be created or
deleted or modified
user_password No NA NA
Provide the password for the user to be
created or modified
privilege_users No NA
● NoAccess
● Readonly
● Operator
● Administrator
Privilege user access is configurable
ipmilanprivilege_users No NA
● No_Access
● Administrator
● Operator
● User
IPMI Lan Privilege user access is
configurable
ipmiserialprivilege_user
s
No NA
● No_Access
● Administrator
● Operator
● User
IPMI Serial Privilege user access is
configurable
NOTE: This parameter is not
supported by PowerEdge Modular
servers.
enable_users No NA
● Enabled
● Disabled
Enabling or Disabling the new iDRAC
user
solenable_users No NA
● Enabled
● Disabled
Enabling or Disabling SOL for iDRAC
user
protocolenable_users No NA
● Enabled
● Disabled
Enabling or Disabling protocol for iDRAC
user
authenticationprotocol
_users
No NA
● T_None
● SHA
● MD5
Configuring authentication protocol for
iDRAC user
privacyprotocol_users No NA
● T_None
● DES
● AES
Configuring privacy protocol for iDRAC
user
Table 12. Return Values
Name Description Returned Type Sample
iDRAC users
Configures the iDRAC users
attributes
Success String
https://github.com/dell/Dell-EMC-Ansible-
Modules-for-iDRAC
Example
-name: Configure the iDRAC users attributes
dellemc_configure_idrac_users:
idrac_ip: "xx.xx.xx.xx"
idrac_user: "xxxx"
idrac_pwd: "xxxxxxxx"
share_name: "\\\\xx.xx.xx.xx\\share"
share_pwd: "xxxxxxxx"
14
Configuring PowerEdge Servers