Users Guide

idrac_pwd: "xxxxxxxx"
share_name: "\\\\xx.xx.xx.xx\\share"
share_pwd: "xxxxxxxx"
share_user: "xxxx"
share_mnt: "/mnt/share"
setup_idrac_timezone: "UTC"
enable_ntp: "Enabled"
ntp_server_1: "x.x.x.x"
ntp_server_2: "x.x.x.x"
ntp_server_3: "x.x.x.x"
Configuring iDRAC Eventing
Module: dellemc_configure_idrac_eventing
Synopsis
This module configures iDRAC eventing related attributes.
Options
Table 15. dellemc_configure_idrac_eventing
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share
share_user Yes NA NA
Network share user in the
format 'user@domain' if
user is part of a domain else
'user'
share_pwd Yes NA NA
Network share user
password
share_mnt Yes NA NA
Local mount path of the
network share with read-
write permission for ansible
user
destination_number No None NA
Destination number for
SNMP Trap
destination No None NA Destination for SNMP Trap
snmp_v3_username No NA NA
SNMP v3 username for
SNMP Trap
snmp_trap_state No NA
● Enabled
● Disabled
Whether to Enable or
Disable SNMP alert
email_alert_state No NA
● Enabled
● Disabled
Whether to Enable or
Disable Email alert
alert_number No None NA
Alert number for Email
configuration
address No NA NA
Email address for SNMP
Trap
custom_message No NA NA
Custom message for SNMP
Trap reference
16 Configuring PowerEdge Servers