Users Guide

http_port: "80"
https_port: "443"
ssl_encryption: "Auto_Negotiate"
tls_protocol: "TLS_1_2_Only"
timeout: "1800"
snmp_enable: "Enabled"
snmp_protocol: "SNMPv3"
community_name: "test"
alert_port: "None"
discovery_port: "162"
trap_format: "None"
Configuring iDRAC Network
Module: dellemc_configure_idrac_network
Synopsis
This module configures the iDRAC networking attributes.
Options
Table 19. dellemc_configure_idrac_network
Parameter Required Default Choices Comments
idrac_ip Yes NA NA iDRAC IP Address
idrac_user Yes NA NA iDRAC username
idrac_pwd Yes NA NA iDRAC user password
idrac_port No 443 NA iDRAC port
share_name Yes NA NA CIFS or NFS Network share
share_user Yes NA NA
Network share user in the format
'user@domain' if user is part of a domain
else 'user'
share_pwd Yes NA NA Network share user password
share_mnt Yes NA NA
Local mount path of the network share
with read-write permission for ansible user
setup_idrac_nic_vlan No NA NA
Configuring the VLAN-related setting for
iDRAC
register_idrac_on_dns No NA
● Enabled
● Disabled
Registering Domain Name System for
iDRAC
dns_idrac_name No NA NA DNS Name for iDRAC
auto_config No NA
● Enabled
● Disabled
Automatically creates the records for DNS
static_dns No NA NA Static configuration for DNS
vlan_id No None NA Configuring the VLAN id for iDRAC
vlan_priority No None NA Configuring the VLAN priority for iDRAC
enable_nic No NA
● Enabled
● Disabled
Whether to Enable or Disable Network
Interface Controller for iDRAC
nic_selection No NA
● Dedicated
● LOM1
● LOM2
● LOM3
● LOM4
Selecting Network Interface Controller
types for iDRAC
Configuring PowerEdge Servers 19