Dell EMC OpenManage Ansible Modules Version 2.0 Installation Guide May 2019 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Dell EMC OpenManage Ansible Modules Version 2.0 © Copyright 2019 Dell Inc. GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.
Contents Chapter 1: Overview...................................................................................................................... 4 Prerequisites......................................................................................................................................................................... 4 OpenManage Ansible Modules support matrix.............................................................................................................
1 Overview Dell EMC OpenManage Ansible Modules allows data center and IT administrators to use RedHat Ansible to automate and orchestrate the configuration, deployment, and update of Dell EMC PowerEdge Servers (12th generation of PowerEdge servers and later) and modular infrastructure by leveraging the management automation capabilities in-built into the Integrated Dell Remote Access Controller (iDRAC) and OpenManage Enterprise (OME) respectively.
Table 2. Managed Node Requirements Dell EMC Device Supported Firmware Versions 12 th and 13 th generations of PowerEdge servers 2.60.60.60 and above 14 th 3.21.21.
2 Installing Dell EMC OpenManage Ansible Modules version 2.0 You can install OpenManage Ansible Modules version 2.0 in two different ways: Topics: • • Installing Dell EMC OpenManage Ansible Modules version 2.0 from Dell support site Installing Dell EMC OpenManage Ansible Modules version 2.0 from GitHub Installing Dell EMC OpenManage Ansible Modules version 2.0 from Dell support site To install Dell EMC OpenManage Ansible Modules version 2.0 from Dell support site: 1. Go to Dell.com/Support/Home. 2.
● To install the latest stable version: # Clone the master branch git clone https://github.com/dell/dellemc-openmanage-ansible-modules cd dellemc-openmanage-ansible-modules # Install the latest version. Run the below command using the sudo or super-user privileges if Ansible is installed using root permission. python install.py ● To install a specific release: # Clone v2.0 release version git clone -b v2.0 --single-branch https://github.
3 Uninstalling Dell EMC OpenManage Ansible Modules version 2.0 You can uninstall OpenManage Ansible Modules version 2.0 in two different ways based on the location you have downloaded it from. Topics: • • Uninstalling Dell EMC OpenManage Ansible Modules version 2.0 when downloaded from Dell support site Uninstalling Dell EMC OpenManage Ansible Modules version 2.0 when downloaded from GitHub Uninstalling Dell EMC OpenManage Ansible Modules version 2.
