Deployment Guide

-d DOMAIN, --domain DOMAIN
Domain-Id for the SmartFabric Services cluster
formation. Accepted Values [1..254].
-u UPLINK, --uplink UPLINK
Uplink Interfaces separated by a comma (,). If empty,
it takes the default value for the platform. If there
is no uplink, provide 'None/Null'
-i ICL, --icl ICL VLT Inter Chassis Link(ICL) interfaces seperated by a
comma (,). If empty, it takes the default value for
the platform. If there is no icl value (in case of
single node cluster), input the value as 'None/Null'
-t, --tagged Flag to indicate if management VLAN is tagged on the
on the TOR uplink ports. By default Uplinks are not
tagged. Default management VLAN 1 is untagged on
Uplink interfaces.
-a, --active_mode Flag to indicate if LACP is to be enabled on the TOR
uplink ports to the spine switches. By default lacp on
TOR uplink ports is not enabled.
-b {2X50GE,4X25GE,4X10GE}, --breakout_uplink {2X50GE,4X25GE,4X10GE}
The breakout mode for uplink interfaces.
-m MANAGEMENT_VLAN, --management_vlan MANAGEMENT_VLAN
Public Management VLAN (Untagged VLAN). By default
management VLAN is 1.
-j JUMPBOX_INTERFACE, --jumpbox_interface JUMPBOX_INTERFACE
The jumpbox interface.
-a ADDITIONAL_BREAKOUT, --additional_breakout ADDITIONAL_BREAKOUT
The additional breakouts of phy-ports or port-groups.
The format is -a '4X10GE{phy-port1/1/2,phy-
port1/1/3};1X40GE{phy-port1/1/4,phy-port1/1/5}'. The
available breakouts are ['1X40GE', '4X10GE']
S52xx platform personality profile
root@OS10:~# sfs_enable_vxrail_personality.py -h
usage: Create VxRail Cluster [-h] [-d DOMAIN] [-u UPLINK] [-i ICL] [-t] [-l]
[-b
{4X50GE,2X50GE,2X40GE,1X100GE,4X25GEFixedFormFactor,1X40GE,2X100GE,4X10GE,8X10GE,8X25GE,4X25GE
,4X10GEFixedFormFactor}]
[-m MANAGEMENT_VLAN] [-j JUMPBOX_INTERFACE]
[-a ADDITIONAL_BREAKOUT]
This command creates a SmartFabric Services cluster of Dell EMC OS10EE
switches with the information provided below.
optional arguments:
-h, --help show this help message and exit
-d DOMAIN, --domain DOMAIN
Domain-Id for the SmartFabric Services cluster
formation. Accepted Values [1..254].
-u UPLINK, --uplink UPLINK
Uplink Interfaces separated by a comma (,). If empty,
it takes the default value for the platform. If there
is no uplink, provide 'None/Null'
-i ICL, --icl ICL VLT Inter Chassis Link(ICL) interfaces separated by a
comma (,). If empty, it takes the default value for
the platform. If there is no ICL value (in case of
single node cluster), input the value as 'None/Null'
-t, --tagged Flag to indicate if management VLAN is tagged on the
on the TOR uplink ports. By default Uplinks are not
tagged. Default management VLAN 1 is untagged on
Uplink interfaces.
-l, --lacp_mode Flag to indicate if LACP is to be enabled on the TOR
uplink ports to the spine switches. By default LACP on
TOR uplink ports is not enabled.
-b
{4X50GE,2X50GE,2X40GE,1X100GE,4X25GEFixedFormFactor,1X40GE,2X100GE,4X10GE,8X10GE,8X25GE,4X25GE
,4X10GEFixedFormFactor}, --breakout_uplink
{4X50GE,2X50GE,2X40GE,1X100GE,4X25GEFixedFormFactor,1X40GE,2X100GE,4X10GE,8X10GE,8X25GE,4X25GE
,4X10GEFixedFormFactor}
The breakout mode for uplink interfaces.
-m MANAGEMENT_VLAN, --management_vlan MANAGEMENT_VLAN
Public Management VLAN (Untagged VLAN). By default
management VLAN is 1.
16
Enable SmartFabric for VxRail