Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
NOTE: You cannot select same network for both untagged and tagged networks.
(Optional) If the static onboarding is Yes, select Leaf Node and Interface (where the server interface is connected), select
the Routing Protocol.
● (Optional) Select the Routing Protocol as None, and click Update.
● (Optional) Select the Routing Protocol as eBGP, enter the ASN and IP address, and click Update.
● (Optional) Select the Routing Protocol as Static Route, enter the Network Address and Next-Hop Address, and
click Update.
NOTE: You cannot edit the server profile that is already configured in the system.
8. Click Add Networks to associate the networks that are part of the fabric for all the server interface
profile. Select the networks for Tagged Networks and Untagged Network from the list, and click Add.
NOTE: Add networks overwrite the existing networks of all the server interface profiles.
120 OMNI support for SmartFabric instances