Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
2. Click Import from Fabric. Discovered Server Interface window appears with the list of discovered interfaces.
NOTE: The interface that is already associated with a server interface profile is not listed in the discovery table.
3. Edit the server profile information of each interface using the Edit option available at the end of each row.
Edit the NIC Bonding configuration and Static Onboarding. If the static onboarding is No, select an Untagged Network
and one or more Tagged Networks and click Update.
NOTE: You cannot select same network for tagged and untagged network.
(Optional) If static onboarding is Yes, select Leaf Node and Interface (where the server interface is connected), select the
Routing Protocol.
● (Optional) Select the Routing Protocol as None, and click Update.
122
OMNI support for SmartFabric instances