Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
● Upload or import the fabric backup file from the local or remote repository to the OMNI VM.
● Restore the fabric from a backup file.
NOTE: The fabric backup and restore features are supported from the OS10.5.0.7 version. If the OS10 software version is
less than 10.5.0.7, the system displays a message that backup is not supported for the software version and all the backup
and restore functions are disabled.
Set Repository
To backup the configuration, set up a local repository on the OMNI VM or a remote repository to store the backup files. OMNI
supports File Transfer Protocol (FTP) and Secure Copy protocol (SCP) to transfer the backup files to a remote repository.
NOTE: You can either set a local or a remote repository at a time. To change the backup repository, edit the repository
setting accordingly.
Set a local repository
1. Select the SmartFabric Instance > Life Cycle Management > Backup and Restore.
2. From Backup and Restore tab, click Set Repository.
3.
Select Local, and click Submit.
4. The system displays local repository configuration success message.
174
Lifecycle management