Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
3. Select 2. Show Connection Status. The status should be up and connected.
Unable to add SmartFabric instance in OMNI
Problem
Not able to add the SmartFabric instance in OMNI.
Causes
● SmartFabric instance is not reachable or down.
● IP address of the SmartFabric instance is not the master node IP address.
Resolution
● Ensure that the SmartFabric is reachable. To check the SmartFabric connectivity:
1. Log in as root user through the OMNI VM console.
2. Check the connectivity of the SmartFabric instance using the ping command. If OMNI is internal, use IPv6 address or
hostname of the service instance. If OMNI is external, use IPv4 address or hostname of the service instance.
:~$ ping <IPv4-address or hostname of the destination>
:~$ ping6 <IPv6-address or hostname of the destination>
3. If ping fails, check if the OMNI interfaces are configured properly, see Verify OMNI VM connectivity.
● Ensure that the IP address is the master node IP address. To check the IP address of master node:
1. Identify the master node using the OS10 CLI command. For more information, see Add SmartFabric instance.
2. Add the SmartFabric instance using the identified master IP address.
Missing networks on server interfaces
Problem
OMNI automation process fails to create and associate the appropriate network on a server interface during synchronization.
Causes
● If there is no relationship formed between the vCenter and service instances.
● Automation service is not running for that vCenter.
Resolution
184
Troubleshooting